|
Home > Logistics > FlexiBag
 |
 |
 ISO22000
|
 ISO 9001:2000 |
 Kosher |
 Tokio Marine Insurance |
The Specification of flexibags consists of
| DESCRIPTION |
TYPICAL CHARACTERISTICS |
 |
2 layer of semi-transparent LLDPE Film with the thickness of 350 microns, while its layer is made of PP woven fabrics of 215 gsm + 25 gsm laminated coat, bright white. Outer Sleeve made of two panels stitched together with the safety seam of the inner tank liner. |
 |
Top loading valve is made of PP 3 with 10 bolts and nuts for stronger seal. |
 |
Today, the camlock cap has been replaced with Yellow screw cap for better safety and more tighten on the loading/discharging valve. |
 |
Manipulating safety valve /air vent for releasing the compact gas / sample taken after loading |
 |
Bulkhead consists of 6 steel bars with woven plastic for better and stronger protection or Tri-wall corrugated paper |
 |
Top Loading and Bottom Discharge are available for more viscocity liquid with 3’Top loading butterfly valve and 2”Bottom Discharge Ball Valve with L-shape for complete discharging. |
Flexibag specifications
| DESCRIPTION |
TYPICAL CHARACTERISTICS |
| Four ply triple co-extrusion polyethylene liner |
125 micron for each ply |
Total weight
Tensile Strength: TD (ASTM D 882)
|
Approx 50 Kg (790 gsm)
30 MPa |
Tensile Strength: MD (ASTM D 882)
Tear Resistance: TD (ASTM D 1922)
Tear Resistance: MD (ASTM D 1922)
|
35 MPa
10 g/m µ
30 g/m µ |
| Low Temperature Flexibility |
-25 deg C |
| High Temperature Flexibility |
70 deg C |
| Dart Impact (ASTM D1709) |
1200g |
| Elongation MD (ASTM D882) |
550% |
| Elongation TD (ASTM D882) |
650% |
| CERTIFICATIONS |
|
| Is made in compliance with the EC and US FDA |
|
| RECOMMENDED USE |
|
| Single use flexitank for foodstuff, pharmaceutical, chemical or Industrial products. |
|
Barrier Bag
One additional inner film of EVOH barrier is available as optional item for carriage of oxygen and/or moisture sensitive product
| Property |
Typical value |
| Thickness |
0.080 mm |
| Tensile Strength (ASTM D882) |
MD 35MPA |
| Tensile Strength (ASTM D882) |
TD 35MPA |
| Elongation at break (ASTM D882) |
MD 350 % |
| Elongation at break (ASTM D882) |
TD 400% |
| Oxygen transmission rate (DIN53380) |
2.3cc/m2/day(23°C;75% RH) |
| Dart Impact (ASTM D1709) |
>600g |
| Elongation TD (ASTM D882) |
650% |
Product Acceptance:
Edible oil, Castor oil , Palm oil, Wine, Fish sauce, Soya Sauce, Fruit Juices, Food Chemicals, Lube oil ,Latex, Ole-chemicals, Bio-diesel and various non-hazardous chemicals. |
